628 SERIES BALL VALVE

Maximum Operating Pressure — 125 psi
Maximum Operating Temperature — 140°F
Ball Through Hole Diameter — .375

Design Considerations

The 628 Series Two-Way Trunnion Ball Valve design promotes multiple configurations to fit the exact end use application. The T-Handle and Ball are one piece extending through the valve body and sealed on the top and bottom. The colored handle center indicates the seal material. Black = Buna-N, Red = EP, Blue = Fluoroelastomer (Viton®) PVC with Buna-N or Ethylene Propylene seals is NSF Standard 42 Certified.

Options

Material Options	Body, Handle and Ball - Gray PVC (Standard)
Seal Options	Buna-N, Ethylene Propylene, Fluoroelastomer (Viton®)
End Options	1/4, 3/8 Male and Female NPT

Example of how to order

Body Material
PVC

Inlet End
1/4 MNPT

Outlet End
1/4 FNPT

Seal
Buna-N

SMC Part Number: PVC 628-4M4F-B

The handle will lie over the open port when the valve is in the Full Open position. SMC Part Numbers are a description of the valve as read left to right, Inlet to Outlet to Outlet.
Example: PVC 628-4M4F-B = 1/4 MNPT Inlet x 1/4 FNPT Outlet

"Printer-Friendly" Version