226 SERIES BALL VALVE

Maximum Operating Pressure — 125 psi
Maximum Operating Temperature — 140°F
Ball Through Hole Diameter — .312

Design Considerations

The 226 Series Two-Way Ball Valve design promotes multiple configurations to fit the exact end use application. Most PVC and White Filled Polypropylene configurations are available as NSF Standard 42 Certified. Nylon, PVDF (Kynar®) and Filled Polypropylene are available for chemical resistance applications. MakroBlend is an NSF Standard 51 Certified Material. The optional panel mount hole is .750 and comes with a Brass or Electroless Nickel Plated Hex or Knurled panel mount nut. The Flag Handle is standard, a Round Knurled Handle is optional. The maximum panel thickness is .125.

Options

Material Options

Gray PVC (Standard), White PVC, White Polypropylene, Black Nylon, White Nylon, MakroBlend, Black PVDF (Kynar®)

Seal Options

Buna-N, Ethylene Propylene, Fluoroelastomer (Viton®)

End Options

1/8, 1/4 Male and Female NPT
1/8, 1/4, 5/16, 3/8, 1/2 Hose Barb
1/4, 3/8 SMC Push-To-Connect

3/8 BIB (Smooth Barb)
1/8, 1/4 JACO (Not NSF Standard 42 Certified)

Handle Options

Gray PVC Flag Handle (Standard), Red PVC, Blue PVC, Black Nylon, White PVC, Clear Lexan, Black Round ABS Knob

Panel Mount Options

Non-Panel Mount (Standard), Brass Knurl Nut, ENP Knurl Nut, Brass Hex Nut, ENP Hex Nut

Example of how to order

Body Material
PVC

Inlet End
1/4 MNPT

Outlet End
1/4 FNPT

Seal
Buna-N

Handle
Round

Panel
ENP HEX

SMC Part Number: PVC 226-4M4F-B,RND HDL,PNL,ENP HEX

The handle will lie over the Inlet port when the valve is in the open position. SMC Part Numbers are a description of the valve as read left to right, Inlet to Outlet.
Example: PVC 226-4M4F-B,RND HDL,PNL,ENP HEX = 1/4 MNPT Inlet x 1/4 FNPT Outlet

"Printer-Friendly" Version