STANDARD PUSH BUTTON VALVES

Operating Pressure — 0 - 125 psi
Operating Temperature — -25ºF - 180°F
Air Flow — 4.5 SCFM @ 50 psi

Design Considerations

The Standard Push Button Valve Series promotes a compact Normally Closed (Momentary only) design with multiple configurations to fit the exact end use application. The Push Button Valves are available with 2-Way (Non-Exhausting) or 3-Way (Exhausting) 10-32 Female porting. The 3-Way (Exhausting) Push Button Valves relieve air around the button. The Panel Mount Push Button Valves require a .500 hole and are supplied with two Electroless Nickel Plated Panel Nuts. The maximum panel thickness is .125.

Options

Material Options	Body - Electroless Nickel Plated Brass Stem - Brass Spring - 302 Stainless Steel
Flow Options	2-Way Normally Closed, 2-Way Normally Open 3-Way Normally Closed, 3-Way Normally Open
Seal Options	Buna-N, Ethylene Propylene, Fluoroelastomer (Viton®)
Body Options	10-32 Female x 10-32 Female 1/8 MNPT x 10-32 Female 1/8 FNPT x 10-32 Female 1/8 MNPT x 10-32 Female - Non-Panel Mount
Fitting Options	1/16 Barb, 3/32 Barb, 1/8 Barb, 10-32 Male, 1/8 Female NPT
Button Options	Black Nylon Button, ENP Brass Button, Black Acetal Ball

SMC Part Number: PB2NC-B, 10-32F, 1/8B

SMC part numbers are a description of the valve as read from left to right, Bottom Input to Side Output port.
Example: PB2NC-B, 10-32F, 1/8B = Push Button, 2-Way, Normally Closed, Buna-N Seal,
10-32 Female Bottom x 1/8 Barb Side Port