STANDARD PILOT VALVE

Standard Pilot Valve

Design Considerations

The Pilot Valve Series promotes a compact Normally Open design with multiple 2-Way (Non-Exhausting) or 3-Way (Exhausting) 10-32 Female porting configurations to fit the exact end use application. The Pilot Valves require approximately 35 psi to actuate and have a 1/6B Pilot Port Standard. The Dual Exhausting Pilot Valve relieves air through a .063 side orifice and through the bottom .063 exhaust orifice. The Panel Mount Pilot Valves require a .500 hole and are supplied with two Electroless Nickel Plated Panel Nuts.

Specifications

Body & Panel Nuts: Electroless Nickel Plated Brass
Stem: Brass
Panel Mounting: 1/2" Panel Hole, 1/4" Max. Thickness

Maximum Operating Pressure – 0 - 125 psi
Maximum Operating Temperature – -25ºF to 180°F
Flow Rate – 2.5 SCFM @ 50 psi

Example of How to Order

PA	2	NC	-B	10-32F	*



					*Output Port – specified only if output is different than input, 1/16 Barb,1/8 Barb,3/32 Barb
				Input Port – 10-32F Standard, 1/16 Barb, 1/8 Barb, 3/32 Barb
			Seal Options – B – Buna, E – Ethylene Propylene (EPDM), F – Fluroelastomer (Viton®)
		Normally Closed
	2-Way (Non-Exhausting) 3-Way (Exhausting)
Pilot Actuated
*** Specify asterisk items if other than standard