PILOT ACTUATED NEEDLE VALVE

Design Considerations

The Pilot Actuated Needle Valve promotes a compact design with multiple configurations to fit the exact end use application. A 6.5 Turn Needle Adjustment is standard. The Panel Mount Needle Valves require a .500 hole and are supplied with two Electroless Nickel Plated Panel Nuts and lock washer.

Specifications

Body & Panel Nuts: Electroless Nickel Plated Brass
Stem: Brass
Panel Mounting: 1/2" Panel Hole, 1/4" Max. Thickness

Maximum Operating Pressure – 0 - 125 psi
Maximum Operating Temperature – -25ºF to 180°F
Flow Rate – 2.1 SCFM @ 50 psi

Example of How to Order

PA	NV	NC	-B	10-32F	*


					*Output Port – specified only if output is different than input, 1/16 Barb,1/8 Barb,3/32 Barb
				Input Port – 10/32F Standard, 1/16 Barb, 1/8 Barb, 3/32 Barb
			Seal Options – B – Buna, E – Ethylene Propylene (EPDM), F – Fluroelastomer (Viton®)
		Normally Closed, Normally Open also available
	Needle Valve
Pilot Acuated
*** Specify asterisk items if other than standard

"Printer-Friendly" Version