732 SERIES BALL VALVE

Maximum Operating Pressure — 500 psi
Maximum Operating Temperature — 180°F
Ball Through Hole Diameter — .218

Design Considerations

The 732 Series Two-Way Right Angle Ball Valve design promotes multiple configurations to fit the exact end use application. The 732 Two-Way Series will support flow and pressure in either direction. The handle has a 90 degree rotation and lies over the side port when the valve is open. The panel mount requires a .625 hole and is supplied with one Hex brass nut. The maximum panel thickness is .125. UL configurations are available and rated to 250 psi. UR configurations are available and rated to 500 psi.

Options

Material Options	Brass Body and Ends, Nickel Plated Brass Ball, Teflon Seats, Zinc Die Cast Stem, Stainless Stem Screw
Seal Options	Buna-N, Ethylene Propylene, Fluoroelastomer (Viton®), Neoprene
Body Options	1/8, 1/4 FNPT
End Options	1/8, 1/4 Female NPT 1/8 Male NPT
Handle Options	2” Black Nylon Handle (Standard), 2" Red Nylon, 2" Yellow Nylon, 2" White Nylon, 2-1/2" Black Nylon, 2-1/2" Red Nylon, 2-1/2" Blue Nylon, No Handle
Plating Options	No Plating (Standard), Electroless Nickel

Example of how to order

Bottom Inlet End
1/8 FNPT

Side Outlet End
1/4 FNPT

Stem Seal
Buna-N

Plating
ENP

Handle
2" RED HDL

SMC Part Number: 732-2F4F-B,ENP,2" RED HDL

The handle will lie over the side port when the valve is in the open position. SMC Part Numbers are a description of the valve as read bottom, then side port, Inlet to Outlet.
Example: 732-2F4F-B,ENP,2" RED HDL = 1/8 FNPT Inlet x 1/4 FNPT Outlet

"Printer-Friendly" Version