027 SERIES BALL VALVE - ONE PIECE BODY

Maximum Operating Pressure — 500 psi
Maximum Operating Temperature — 180°F
Ball Through Hole Diameter — .218

Design Considerations

The 027 Series Two-Way Ball Valve compact design promotes multiple configurations to fit the exact end use application. The 027 Ball Valve Series is rated to 500 psi and will support flow and pressure in either direction. The 027 Series has a one-piece body construction to cover 1/4" NPT end configuration applications. The Zinc Die Cast Lever Handle is standard. Handles can be ordered reversed - to lie over the outlet when the valve is in the open position. UL configurations are available and rated to 250 psi. UR configurations are available and rated to 500 psi.

Options

Material Options	Brass Body, Nickel Plated Brass Ball, Tefl on Seats, Stainless Handle Screw
Seal Options	Buna-N, Ethylene Propylene, Fluoroelastomer (Viton®), Neoprene, Perfluoro Elastomer
Body Options	1/4 Female x 1/4 Female NPT 1/4 Female x 1/4 Male NPT 1/4 Female x 1/8 Male NPT
Handle Options	Zinc Die Cast Lever (Standard), Zinc Die Cast Lever with Red Vinyl Sleeve, Steel Lever, Steel Lever with Red Vinyl Sleeve, Round Zinc Die Cast Handle, Black Nylon T-Handle, Blue Nylon Handle, .312 x 1” Zinc Die Cast Stem, Screw Slot Headed Ball
Plating Options	No Plating (Standard), Electroless Nickel

Example of how to order

Inlet End
1/4 FNPT

Outlet End
1/4 MNPT

Seal
Buna-N

Plating
ENP

Handle
Steel

SMC Part Number: 027-4F4M-B,SH,ENP
The handle will lie over the Inlet port when the valve is in the open position. SMC Part Numbers are a description of the valve as read left to right, Inlet to Outlet.
Example: 027-4F4M-B,SH, ENP = 1/4 FNPT Inlet x 1/4 MNPT Outlet

"Printer-Friendly" Version