025 SERIES BALL VALVE

Maximum Operating Pressure — 500 psi
Maximum Operating Temperature — 180°F
Ball Through Hole Diameter — .218

Design Considerations

The 025 Series One-Way Ball Valve compact design promotes multiple configurations to fit the exact end use application. The 025 Ball Valve Series is rated to 500 psi and will support flow and pressure only in the flow direction. The 025 Series has a one-piece body construction, stamped with directional flow arrows, to cover 1/4" NPT end configuration applications. The Zinc Die Cast Lever Handle is standard. Handles can be ordered Reversed - to lie over the outlet when the valve is in the open position. UL configurations are available and rated to 250 psi. UR configurations are available and rated to 500 psi.

Options

Material Options

Brass Body, Nickel Plated Brass Ball, Teflon® Seats, Stainless Handle Screw

Seal Options

Buna-N, Ethylene Propylene, Fluoroelastomer (Viton®), Neoprene

Body Options

1/4 Female x 1/4 Female NPT
1/4 Female x 1/4 Male NPT
1/4 Female x 1/8 Female NPT

1/4 Female x 1/4 Hose Barb
1/4 Female x 11/16-16 Male
1/4 Female x 7/16-24 Female

Handle Options

Zinc Die Cast Lever (Standard), Zinc Die Cast Lever with Red Vinyl Sleeve, Steel Lever, Round Handle, Steel Lever with Red Vinyl Sleeve, Round Zinc Die Cast Handle, Black Nylon T-Handle, Blue Nylon Knob, .312 x 1” Stem, Screw Slot Headed Ball

Example of how to order

Inlet End
1/4 FNPT

Outlet End
1/4 MNPT

Seal
Buna-N

Handle
Steel

Plating
ENP

SMC Part Number: 025-4F4M-B,SH,ENP

The handle will lie over the Inlet port when the valve is in the open position. SMC Part Numbers are a description of the valve as read left to right, Inlet to Outlet.
Example: 025-4F4M-B,SH,ENP = 1/4 FNPT Inlet x 1/4 MNPT Outlet

"Printer-Friendly" Version