012 SERIES BALL VALVE
Maximum Operating Pressure — 500 psi
Maximum Operating Temperature — 180°F
Ball Through Hole Diameter — .218
Design Considerations
The 012 Series Two-Way Ball Valve compact design promotes multiple configurations to fit the exact end use application. The 012 Ball Valve Series is rated to 500 psi and will support flow and pressure in either direction. The 012 Series has a two piece body and end construction to cover 1/8" NPT end configuration applications. The Zinc Die Cast Lever Handle is standard. Handles can be ordered Reversed - to lie over the outlet when the valve is in the open position. UL configurations are available and rated to 250 psi. UR configurations are available and rated to 500 psi.
Options
| Material Options | Brass Body and Ends, Nickel Plated Brass Ball, Teflon® Seats, Stainless Handle Screw | |||
| Seal Options | Buna-N, Ethylene Propylene, Fluoroelastomer (Viton®), Neoprene, Perfluoro Elastomer | |||
| End Options |
|
|||
| Body Options | 1/8 Male and Female NPT | |||
| Handle Options | Zinc Die Cast Lever (Standard), Zinc Die Cast Lever with Red Vinyl Sleeve, Steel Lever, Steel Lever with Red Vinyl Sleeve, Round Zinc Die Cast Handle, Black Nylon T-Handle, Blue Nylon Knob, .312 x 1” Zinc Die Cast Stem, Screw Slot Headed Ball | |||
| Plating Options | No Plating (Standard), Electroless Nickel |
Example of how to order
| Inlet End 1/8 MNPT |
Outlet End 1/8 FNPT |
Seal Buna-N |
Plating Round |
Plating ENP |
SMC Part Number: 012-2M2F-B,RND HDL,ENP
The handle will lie over the Inlet port when the valve is in the open position. SMC Part Numbers are a description of the valve as read left to right, Inlet to Outlet.
Example: 012-2M2F-B,RND HDL,ENP = 1/8 MNPT Inlet x 1/8 FNPT Outlet